Daikin RMXS-L Series Service Manual page 93

SiUS181631EA
End of Function
The function ends when HOME LEAVE button is pressed again during HOME LEAVE operation or
when POWERFUL button is pressed.
HOME LEAVE operation
set temp.
HOME LEAVE operation
set temp.
Setting Temperature and Airflow Rate
When using HOME LEAVE operation for the first time, set your preferred temperature and airflow
rate for HOME LEAVE operation.
Cooling
Heating
1. Press HOME LEAVE button.
2. Adjust the temperature with
3. Adjust the airflow rate with FAN button.
HOME LEAVE operation will run with these settings the next time you start HOME LEAVE
operation. To change the recorded information, repeat steps 1 – 3.
Notes: 1. The set temperature and airflow rate are recorded in the remote controller. When the remote
2. The operation mode cannot be changed while HOME LEAVE operation is being used.
Functions and Control
If this button is pressed in POWERFUL operation, the POWERFUL operation is canceled and
this function becomes effective.
HOME LEAVE button is ineffective in dry operation and fan operation.
Cooling
Set temp.
Normal operation
Heating
Set temp.
Normal operation
Initial setting
Temperature
25°C (77°F)
25°C (77°F)
Make sure is displayed on the remote controller.
controller is reset due to battery replacement, the temperature and airflow rate for HOME
LEAVE operation needs to be set again.
CTXG, CTXS, FTXS, CDXS, FDXS, FVXS Series Functions
HOME LEAVE operation
Start
HOME LEAVE operation
Start
Airflow rate Temperature
18 ~ 32°C (64.4 ~ 89.6°F)
10 ~ 30°C (50 ~ 86°F)
or button.
Normal operation
Time
Stop
(R1366)
Normal operation
Time
Stop
(R17859)
Selectable range
Airflow rate
5 steps, ,
5 steps, ,
83