** 1 or 2 cable lengths may be specified for a PCIe add-in card. Generally, if the cable connector of the add-in card is located on the back edge of the
card, a shorter cable is specified. Cable connectors on the top edge or near the front of the add-in card will require the longer cable length.
Drive Bay # 1 - SAS / SATA / NVMe Cable Guide for Switch Add in Cards
Determine which system configuration will have add in cards (AIC) installed, the drive quantity (number of drive bays) and where they will be installed.
Find that configuration in the table below to determine how to cable the AIC and which cable to use. The Intel product code for each cable required is
listed below the cabling identification in the Cable Connections Drive Bay columns.
Note: (R) Denotes cables that are routed on the right side of the chassis, and (L) cables that are routed on the left side of the chassis.
System
Configuration
R2208
R2208
R2208
R2208
R2208
R2208
R2208
Intel® Server S2600WF Product Family Configuration Guide and Spares/Accessories List