Specifying Paper Type And Paper Size Using Web Image Monitor; Specifying A Custom Paper Size - Ricoh SP 221S User Manual

Specifying Paper Type and Paper Size Using
Web Image Monitor
This section describes how to specify the paper size and paper type using Web Image Monitor.
1. Start the web browser and access the machine by entering its IP address.
2. Click [System Settings].
3. Select the paper type and paper size for the desired tray.
4. Enter the administrator password if required.
5. Click [OK].
6. Close the web browser.

Specifying a Custom Paper Size

1. Start the web browser and access the machine by entering its IP address.
2. Click [System Settings].
3. Select [Custom Size] in the [Paper Size] list.
4. Select [mm] or [inch] and specify the width and length.
5. Enter the administrator password if required.
6. Click [OK].
7. Close the web browser.
opal-p3_mf3_com_user_guide_gb_00229282_eng.xml

Specifying Paper Type and Paper Size Using Web Image Monitor

53
Draft 2016/05/27