2. Paper Specifications and Adding Paper
2.
Pinch the clips on the side paper guides and slide them to match the standard size.
3.
Pinch the end paper guide and slide it inward to match the standard size.
When loading A5 SEF, A4 or letter size paper, align the paper guide to the following position:
4.
Fan the paper before loading it in the tray.
5.
Load the new paper stack print side down.
Make sure paper is not stacked higher than the upper limit marked inside the tray.
42
DCT030
DCT031
DCT871
opal-p3_mf3_com_user_guide_gb_00228426_eng.xml
Draft 2016/05/27