Scan; Starting Or Stopping Scan; Talkback; Deleting A Nuisance Channel - Motorola Commercial Series User Manual

SCAN

You can monitor multiple channels and receive any
calls that are transmitted on them. Channels can be
programmed into a scan list by your dealer. Your
radio automatically switches to a scan list channel
when it detects activity on it.

STARTING OR STOPPING SCAN

The LED indicator blinks green during a scan
operation and stops blinking when the radio
switches to a channel.
You can start or stop a scan operation by
1 To start or stop a scan operation, press the
preprogrammed Scan button.
- or -
2 Select a channel that has been
preprogrammed by your dealer to start Auto
Scan.
Note: You do not need to press a prepro-
grammed Scan button.
3 Select a channel that has not been
preprogrammed by your dealer to stop Auto
Scan.

TALKBACK

If the Talkback option is preprogrammed, you can
respond to any calls received during the scan
operation. To respond, press the PTT button before
the programmed hangtime elapses. Otherwise, the
radio will continue scanning. Check with your dealer
for details.

DELETING A NUISANCE CHANNEL

Note: Your dealer must have preprogrammed a
button to Nuisance Delete to access this
feature.
:
If a channel continually generates unwanted calls or
noise (a "nuisance" channel), you can temporarily
remove it from the scan list:
1 While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2 Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot delete a priority channel or the
last remaining channel in the scan list.
English
15