Managing The Switch; Displaying Information About Installed Hardware Modules - Cisco Nexus 7702 Hardware Installation Manual

Managing the Switch

•
•
•
•
•
•
•
•
•
•
•
•
•
•

Displaying Information About Installed Hardware Modules

To display information about the switch hardware and the hardware modules installed in the switch chassis,
use the show hardware command.
Enter the show hardware command.
Example:
switch# show hardware
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Displaying Information About Installed Hardware Modules, page 37
Displaying the Hardware Inventory for a Switch, page 39
Displaying the Backplane and Serial Number Information, page 40
Displaying Environmental Information for a Switch, page 43
Displaying Temperatures for Modules, page 44
Connecting to a Module, page 46
Saving the Module Configuration, page 46
Displaying Power Usage Information, page 47
Reloading a Module, page 47
Rebooting the Switch, page 48
Overview of Supervisor Modules, page 48
Overview of I/O Module Support, page 49
Power Modes Overview, page 52
Overview of Fan Trays, page 56
5
C H A P T E R
Cisco Nexus 7702 Hardware Installation Guide
37