Displaying Environmental Information For A Switch - Cisco Nexus 7702 Hardware Installation Manual

Managing the Switch
Block Checksum
Serial Number

Displaying Environmental Information for a Switch

You can display all of the environment-related switch information by using the show environment command.
Enter the show environment command.
Example:
switch# show environment
Power Supply:
Voltage: 50 Volts
Power
Supply Model
------- -------------------
1 N7K-AC-3KW
2 N77-AC-3KW
Module Model
------- -------------------
1 N77-F348XP-23
2 N77-SUP2E
fan1 N77-C7702-FAN
N/A - Per module power not available
Power Usage Summary:
--------------------
Power Supply redundancy mode (configured)
Power Supply redundancy mode (operational)
Total Power Capacity (based on configured mode)
Total Power of all Inputs (cumulative)
Total Power Output (actual draw)
Total Power Allocated (budget)
Total Power Available for additional modules
Clock:
----------------------------------------------------------
Clock
----------------------------------------------------------
A
B
Fan:
------------------------------------------------------
Fan
------------------------------------------------------
Fan1(sys_fan1)
Fan_in_PS1
Fan_in_PS2
Fan Zone Speed: Zone 1: 0x79
: 0x31e
: JAE191106QG
Actual
Output
(Watts )
-----------
251 W
245 W
Actual
Draw
(Watts )
-----------
328 W
131 W
39 W
Model Hw
Clock Module --
Clock Module --
Model Hw
N77-C7702-FAN 0.0
-- --
-- --
Displaying Environmental Information for a Switch
Total
Capacity Status
(Watts )
----------- --------------
3000 W Ok
3000 W Ok
Power
Allocated Status
(Watts )
----------- --------------
480 W Powered-Up
265 W Powered-Up
300 W Powered-Up
PS-Redundant
PS-Redundant
3000 W
6000 W
496 W
1045 W
1955 W
Status
NotSupported/None
NotSupported/None
Status
Ok
Ok
Ok
Cisco Nexus 7702 Hardware Installation Guide
43