I/O Module Leds - Cisco Nexus 7702 Hardware Installation Manual

LEDs
LED
Slot 0

I/O Module LEDs

LED
ID
Status
Color Status
Green The expansion flash CompactFlash or USB disk is being accessed. Do
not remove the media until the LED is off.
Off The log flash CompactFlash or USB disk is not being accessed. You
can remove the media while this LED is off.
Color Status
Flashing blue The operator has activated this LED to identify this module in the
chassis.
Off This LED is not being used.
Green All diagnostics passed. This module is operational (normal
initialization sequence).
Red Indicates one of the following:
Flashing red Indicates one of the following:
Off The module is not receiving power.
• The module has detected a slot ID parity error and will not
power on or boot up.
• The module is not fully inserted, and it is not making a reliable
connection with the supervisor.
• The module has failed diagnostic tests and has powered down.
• The switch has just been powered on, and the module is
resetting.
• The module is resetting and both ejector levers are out.
• The module has been inserted during the initialization process.
• The module could not power up because of insufficient power.
• An overtemperature condition has occurred. A major
temperature threshold has been exceeded during environmental
monitoring
Cisco Nexus 7702 Hardware Installation Guide
I/O Module LEDs
125