Displaying The Sdm Templates - Cisco 3032 Software Configuration Manual

Displaying the SDM Templates

This is an example of an output display when you have changed the template and have not reloaded the
switch:
Switch# show sdm prefer
The current template is "desktop routing" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of igmp groups + multicast routes:
number of unicast routes:
number of qos aces:
number of security aces:
On next reload, template will be "desktop vlan" template.
To return to the default template, use the no sdm prefer global configuration command.
This example shows how to configure a switch with the routing template:
Switch(config)# sdm prefer routing
Switch(config)# end
Switch# reload
Proceed with reload? [confirm]
This example shows how to configure the IPv4-and-IPv6 default template:
Switch(config)# sdm prefer dual-ipv4-and-ipv6 default
Switch(config)# exit
Switch# reload
Proceed with reload? [confirm]
Displaying the SDM Templates
Use the show sdm prefer privileged EXEC command with no parameters to display the active template.
To display the resource numbers supported by the specified template, use the show sdm prefer [access
| default | dual-ipv4-and-ipv6 {default | vlan} |routing | vlan] privileged EXEC command.
This is an example of output from the show sdm prefer command that displays the template in use.
Switch# show sdm prefer
The current template is "desktop default" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of igmp groups + multicast routes:
number of unicast routes:
number of policy based routing aces:
number of qos aces:
number of security aces:
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
8-6
number of directly connected hosts:
number of indirect routes:
number of directly connected hosts:
number of indirect routes:
Chapter 8
3K
1K
11K
3K
8K
0.5K
1K
6K
1K
8K
6K
2K
0
0.5K
1K
Configuring SDM Templates
OL-12247-04