Cisco 3032 Software Configuration Manual page 14

Contents
Configuring Smartports Macros
12
C H A P T E R
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
xiv
Using Interface Configuration Mode
Procedures for Configuring Interfaces
Configuring a Range of Interfaces
Configuring and Using Interface Range Macros
Using the Internal Ethernet Management Port
Understanding the Internal Ethernet Management Port
Supported Features on the Ethernet Management Port
Layer 3 Routing Configuration Guidelines
Monitoring the Ethernet Management Port
TFTP and the Ethernet Management Port
Configuring Ethernet Interfaces
Default Ethernet Interface Configuration
Configuring Interface Speed and Duplex Mode
Speed and Duplex Configuration Guidelines
Setting the Interface Speed and Duplex Parameters
Configuring IEEE 802.3x Flow Control
Configuring Auto-MDIX on an Interface
Adding a Description for an Interface
Configuring Layer 3 Interfaces
Configuring SVI Autostate Exclude
Configuring the System MTU
Monitoring and Maintaining the Interfaces
Monitoring Interface Status
Clearing and Resetting Interfaces and Counters
Shutting Down and Restarting the Interface
Understanding Smartports Macros
Configuring Smartports Macros
Default Smartports Macro Configuration
Smartports Macro Configuration Guidelines
Creating Smartports Macros
Applying Smartports Macros
Applying Cisco-Default Smartports Macros
Displaying Smartports Macros
11-8
11-9
11-10
11-11
11-13
11-16
11-16
11-17
11-17
11-17
11-19
11-19
11-21
11-22
11-23
11-24
11-25
11-26
11-28
11-28
11-29
11-29
12-1
12-1
12-2
12-2
12-2
12-4
12-5
12-6
12-8
11-13
11-15
11-20
OL-12247-04