Displaying Switch Stack Information - Cisco 3032 Software Configuration Manual

Chapter 5 Managing Switch Stacks

Displaying Switch Stack Information

To display saved configuration changes after resetting a specific member or the stack, use these
privileged EXEC commands:
Table 5-4
Command
show platform stack manager all
show platform stack ports {buffer |
history}
show switch
show switch stack-member-number
show switch detail
show switch neighbors
show switch stack-ports [summary] Display port information for the stack. Use the summary
show switch stack-ring activity
[detail]
Troubleshooting Stacks
•
•
•
•
•
•
OL-12247-04
Commands for Displaying Stack Information
Manually Disabling a Stack Port, page 5-28
Re-Enabling a Stack Port While Another Member Starts, page 5-28
Understanding the show switch stack-ports summary Output, page 5-29
Identifying Loopback Problems, page 5-30
Finding a Disconnected Stack Cable, page 5-33
Fixing a Bad Connection Between Stack Ports, page 5-34
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Description
Display all stack information, such as the stack protocol
version.
Display the stack port events and history.
Display summary information about the stack, including the
status of provisioned switches and switches in
version-mismatch mode.
Display information about a specific member.
Display detailed information about the stack ring.
Display the stack neighbors.
keyword to display the stack cable length, the stack link status,
and the loopback status.
Display the number of frames per member that are sent to the
stack ring. The detail keyword displays the number of frames
per member that are sent to the stack ring, the receive queues,
and the ASIC.
Displaying Switch Stack Information
5-27