Live Screen [Live] : Multi Display Mode; Multi Display Mode - Panasonic AW-HR140EJ Operating Instructions Manual

Web screen operations (continued)

Live screen [Live] : Multi display mode

In this mode, the images of a multiple number of cameras can be monitored on one screen (called the 'multi screen').
The image of 4 cameras or max. 16 cameras can be monitored at one time.
When the camera title of any of the images is clicked, the live screen [Live] (single display mode) of the camera concerned is displayed as a separate
window.
In order to use the multi screen, the cameras whose images are to be shown on the multi screen must be set ahead of time.
With one group consisting of 4 cameras, up to four groups of cameras (a total of 16 cameras) can be registered. (→ page 83)
Multi screen consisting of 4 sub-screens
1.
Multi-Screen list box [Multi-screen]
The live screen [Live] display method is selected here.
The IP videos of the connected camera are
displayed.
[Single]
[4Split 4/1 Group]
[4Split 4/2 Group]
When the cameras for multi-screen display
have been set ahead of time using the multi-
screen (→ page 83), it is possible to view
[4Split 4/3 Group] a multiple number of IP videos on a single
screen. (Multi display mode)
[4Split 4/4 Group]
[16Split]
1
64
Multi screen consisting of 16 sub-screens
<NOTE>
• The IP videos displayed on the multi screen are JPEG images only.
• IP images are in JPEG format only and audio is not output.
• Images are stretched vertically to fit the [4:3] aspect ratio of the multi
screens.
• It is not possible to transfer from the live screen [Live] to the multi
screen if the unit's power has been turned off, or the network cable
has been disconnected, while IP videos are being displayed.
• When [JPEG transmission(1)], [JPEG transmission(2)] or [JPEG
transmission(3)] is set to [Off], the multi screen may not display. Set
all to [On] to use the multi screen.