Live Screen - Panasonic AW-HE40HWP Operating Instructions Manual

Controls and settings from web screen
■

Live screen

When the button is pressed, the display switches to the Live screen on which the camera images are displayed and the
camera's panning, tilting, zooming, focusing and other functions can be controlled.
● Power ON button / Standby button
The unit's power is turned on when the [Power ON] button
is pressed.
When the [Standby] button is pressed, the unit is set to
the standby mode.
In standby mode, all the buttons on the Live screen except
for the [Setup] button and [Power ON] button are disabled.
(continued)
Notes
● If Power ON or Standby is selected too quickly,
the status selected and the display shown may not
correspond.
In a case like this, follow the steps below to restore
the correct status display:
[When using Windows]
Press the [F5] key on the keyboard of the
personal computer.
[When using Mac]
Press the [Command] + [R] keys on the keyboard
of the personal computer.
● When operation is transferred to the STANDBY
mode: The current zoom, focus and iris positions
are stored in the memory (POWER ON preset).
● When operation is transferred to the POWER ON
mode: The zoom, focus and iris are transferred
to the positions which were stored in the memory
(POWER ON preset) when operation was
transferred to the STANDBY mode.
57