Panasonic AW-HR140EJ Operating Instructions Manual page 81

Web screen configurations (continued)
Preset D-Extender
Select the digital extender function for when preset memory is recalled.
Setting value:
Off Do not change the digital extender value when recalling the
preset.
On Perform the operation to set the digital extender value from
the time of preset registration when recalling the preset.
Factory settings: Off
Preset Zoom Mode
Select the zoom operation for when preset memory is recalled.
Setting value:
Mode A Perform the zoom operation in line with the pan/tilt
operation.
Mode B Perform the zoom operation quicker than the pan/tilt
operation.
Factory settings: Mode A
Freeze During Preset
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still
of the image immediately preceding the start of preset playback
being output. The image freeze is released when preset playback is
finished.
Setting value: Off / On
Factory settings: Off
Speed With Zoom POS.
"Off" or "On" is set here for the function used to adjust the pan-tilt
adjustment speed in conjunction with the zoom magnification.
When [On] is set, the panning and tilting operations will become
slower in the zoom status.
This function has no effect during preset operations.
Setting value: Off / On
Factory settings: On
Focus Mode
Select auto or manual mode for the focus adjustment function.
Setting value:
Auto Always adjust focus automatically.
Manual Adjust focus manually.
Factory settings: Auto
<NOTE>
• [Focus Mode] cannot be set to [Auto] when [Frame Mix] is set to
[18dB] or [24dB].
Focus ADJ With PTZ.
"Off" or "On" is set here for the function which compensates for out-of-
focusing when it occurs during panning, tilting or zooming operations.
When [Off] is set, adjust the focus as required after zooming or set
the focus to the auto mode.
This item can be selected only when [Manual] has been selected as
the [Focus Mode] setting.
Setting value:
Off Out-of-focusing is not compensated.
On Out-of-focusing is compensated.
Factory settings: Off
Digital Zoom
"Disable" or "Enable" is set here for the digital zoom function.
If zooming is performed toward the Tele end beyond the maximum
position when [Enable] has been selected, the digital zoom can be
operated continuously. Zooming will stop temporarily at the position
where the optical zoom and digital zoom are switched so after it has
stopped at this position, proceed with zooming again.
When the setting is changed to "Disable" while already in the digital
zoom region, the zoom will automatically move to the maximum
position of the optical zoom.
Setting value: Disable / Enable
Factory settings: Disable
<NOTE>
The digital zoom is set to off when color bars are displayed during
digital zooming.
Max Digital Zoom
Set the maximum digital zoom magnification.
Setting value:
x2 / x3 / x4 / x5 / x6 / x7 / x8 / x9 / x10
Factory settings: x10
Digital Extender
Turn the digital extender function off/on.
When this is set to [On], the digital zoom will be fixed at 1.4x.
When [Digital Zoom] is set to [Enable], [Digital Extender] is disabled.
Setting value: Off / On
Factory settings: Off
IS
Select the image stabilization mode.
Setting value:
Off Do not perform image stabilization.
OIS Perform optical image stabilization (OIS).
Dynamic I.S. Perform pan/tilt mechanism system image stabilization in
System addition to optical image stabilization.
Factory settings: Off
<NOTE>
• The optical image stabilization (OIS) functionʼs level of correction is
reduced during pan/tilt operations.
OSD Mix
Select whether to turn off/on camera menu, status, and other displays
for each output image.
Setting value: Off / On
Factory settings: On
SDI Out
IP
When this is set to [On], the camera menu, status, and other displays
for corresponding output image are displayed.
Setting value:
The camera menus and statuses are not displayed on the
Off
output pictures targeted by the setting items listed above.
The camera menus and statuses are displayed for the output
On
pictures covered by the setting items listed above.
Factory settings: On
<NOTE>
• When this is set to [Off], the camera menu can be displayed for
about 2 minutes after the unit is turned on.
81