How To Turn The Power On And Off; Turning The Power On; Turning The Power Off; Concerning The Mode Transitions - Panasonic GP-VD131 Operating Instructions Manual

How to turn the power on and off

 Turning the power on
p
p p This unit does not have a power switch. Its power is turned on when power is supplied to the unit.
Unit's power OFF
Status display lamp: Off
Standby mode
Status display lamp: Orange
Power ON mode
Status display lamp: Green
p p The camera moves so that it is positioned at the home position.
 Turning the power off
p
p p When the supply of power to the unit is cut off, the unit's power is turned off.
The power can be turned off regardless of the unit's mode (standby mode or power ON mode).
 Concerning the mode transitions
p
[Description of each mode]
Mode
Standby mode
Status display lamp: Orange
Power ON mode
Status display lamp: Green
The transition of the status of the camera mode is linked with the status of the HD Visual Communication Unit.
[Linkage with the screen standby status of the HD Visual Communication Unit]
Standby mode
Status display lamp: Orange
p p The camera is moved so that it
is positioned toward the lower
right.
[Linkage with the status of the connection with the HD Visual Communication Unit]
Standby mode
Status display lamp: Orange
p p The camera is moved so that it
is positioned toward the lower
right.
Power is supplied.
When the power of the HD Visual Communication Unit has been turned on and the
unit has been connected properly (about 30 seconds after)
When the HD Visual Communication Unit is in one of the statuses described below:
p p HD Visual Communication Unit is in screen standby mode.*
p p The power of the HD Visual Communication Unit is OFF or the camera has not been
connected to the HD Visual Communication Unit.
*
When the administrator menu settings of the HD Visual Communication Unit are used to select [HDMI
Settings] followed by [Standby] and then [Standby] is set from [OFF] to [ON], the transition of the
status of the camera mode becomes linked with the screen standby status of the unit. For details of
the screen standby function, refer to the operating instructions of the HD Visual Communication Unit.
Status in which the camera has been connected properly to the HD Visual Communication
Unit and can be controlled
When the [Video Out On/Off] button on the remote
controller is pressed, etc.
When the [Video Out On/Off] button on the remote
controller is pressed, etc.
*
When pressing the [Video Out On/Off] button
repeatedly, make sure to wait at least 10 seconds
between each press.
Connection of the HDMI cable with the HD Visual
Communication Unit's power ON/Power of the HD Visual
Communication Unit is ON while the HDMI cable is connected.*
60 seconds after detecting that the HD Visual
Communication Unit is powered OFF*/60 seconds
after detecting that the HDMI cable is not connected
* Mode transition when power is turned ON or OFF only
occurs on the KX-VC300 and KX-VC600.
Status
Power ON mode
Status display lamp: Green
p p The camera's direction is returned
to the position before the transition
to the standby mode.
Power ON mode
Status display lamp: Green
p p The camera's direction is returned
to the position before the transition
to the standby mode.
19