Table of Contents
Advertisement
1. Press Copy on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Copy Feature and press OK.
4. Press the up/down arrow to highlight Layout and press OK.
5. Press the up/down arrow to highlight Poster Copy and press OK.
6. Press Stop/Clear to return to ready mode.
Your original is divided into 9 portions. Each portion is scanned and
printed one by one in the following order:
Clone copying
The machine prints multiple original images on a single page. The number
of images is automatically determined by the original image and the paper
size.
This copy feature is available only when you place originals on the scanner
glass.
1. Press Copy on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Copy Feature and press OK.
4. Press the up/down arrow to highlight Layout and press OK.
5. Press the up/down arrow to highlight Clone Copy and press OK.
6. Press Stop/Clear to return to ready mode.
You cannot adjust the copy size using the Reduce/Enlarge for the
Clone Copy feature.
COPYING ON BOTH SIDES OF ORIGINALS
You can set the machine to print copies on both sides of paper.
1. Press Copy on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Copy Setup and press OK.
4. Press the up/down arrow to highlight Duplex Print and press OK.
5. Press the up/down arrow until the binding option you want highlights.
•
Off: Prints in Normal mode.
•
1->2Side Long: Prints pages to be read like a book.
•
1->2Side Short: Prints pages to be read by flipping like a note pad.
2
3
5
6. Press OK to save your selection.
7. Start copying a document.
DECIDING THE FORM OF COPY OUTPUT
You can set the machine to sort the copy job. For example, if you make 2
copies of a 3 page original, one complete 3 page document will print follwed
by a second complete document.
1. Press Copy on the control panel.
2. Place originals, face up, in the document feeder. Or you can use the
scanner glass with a single original document face down and closed the
scanner lid.
3. Press OK and enter the number of copies using the number keypad.
4. Press Menu on the control panel.
5. Press the up/down arrow to highlight Copy Setup and press OK.
6. Press the up/down arrow to highlight Change Default and press OK.
7. Press the up/down arrow to highlight Collation and press OK.
8. Press the up/down arrow to highlight On and press OK.
•
On: Prints output in sets to match the sequence of originals.
•
Off: Prints output sorted into stacks of individual pages.
9. Press Start to begin copying.
One complete document will print followed by the second complete
document.
SETTING COPY TIMEOUT
You can set the time the machine waits before it restores the default copy
settings, if you do not start copying after changing them on the control
panel.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Machine Setup and press OK.
4. Press the up/down arrow to highlight Timeout and press OK.
5. Press the up/down arrow until the time setting you want highlights.
Selecting Off means that the machine does not restore the default
settings until you press Start to begin copying, or Stop/Clear to cancel.
6. Press OK to save the selection.
7. Press Stop/Clear to return to ready mode.
Copying_ 72
Advertisement
Table of Contents
