Installing Wireless Network Connected Machine's Driver - Samsung SCX-5636 Series User Manual

• Operation Mode: Operation Mode refers to the type of wireless
connections.
- Ad-hoc: allows wireless devices to communicate directly
with each other in a peer-to-peer environment.
- Infrastructure: allows wireless devices to communicate with
each other through an access point.
If your network's Operation Mode is Infrastructure, select the
SSID of the access point. If the Operation Mode is Ad-hoc,
select the machine's SSID. Note that "airportthru" is the default
SSID of your machine.
5. Click Next.
If wireless security setting window appears, enter the registered
password (network key) and click Next.
6. The confirmation window appears, please check your wireless setup.
If the setup is right, click Apply.
7. Click OK.
Disconnect the network cable (standard or crossover). Your
machine should then start communicating wirelessly with the
network. In case of Ad-hoc mode, you can use a wireless LAN
and wired LAN simultaneously.
Now go to "Installing wireless network connected machine's driver"
on page 46.
Installing wireless network connected machine's
driver
You must install the printer driver software for printing. The software
includes drivers, applications, and other user friendly programs.
• The following procedure is based on Windows XP. The procedure
and popup window which appears during the installation may differ
depending on the operating system, machine features, or the
interface in use.
• Make sure that the network setup for your machine is completed.
All applications should be closed on your computer before
beginning installation.
1. Insert the supplied software CD into your CD-ROM drive. The software
CD should automatically run and an installation window appear.
• If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter which represents
your drive. Click OK.
• If you use Windows Vista, click Start > All programs > Accessories
> Run.
Type X:\Setup.exe replacing "X" with the letter which represents
your drive and click OK.
• If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in the
User Account Control windows.
2. Click Next.
If necessary, select a language from the drop-down list.
3. Select Typical installation for a network printer and then click Next.
If your printer is not connected to the network, the following
window will appear. Select a setup option you want, click Next.
Then the Set IP Address window appears. Do as follows:
a) Select a printer to be set with a specific IP address from the list.
b) Configure an IP address, subnet mask, and gateway for the
printer manually and click Configure to set the specific IP
address for the network printer.
c) Click Next, and go to step 6.
d) You can also set the network printer via SyncThru Web
Service, an embedded web server. Click Launch SWS on Set
IP Address windows. Your machine's embedded website
opens.
Network setup_ 46