Table of Contents
Advertisement
Graphics
The Graphics tab provides options for selecting Resolution. Select
Graphics from the drop-down list under Orientation to access the
graphic features.
•
Resolution: This option allows you to select the printing resolution.
The higher the setting, the sharper the clarity of printed characters
and graphics. The higher setting also may increase the time it takes
to print a document.
Paper
Set Paper Type to correspond to the paper loaded in the tray from
which you want to print. This will let you get the best quality printout. If
you load a different type of print material, select the corresponding paper
type.
Printer Features
Printer Features tab provides Reverse Duplex Printing and Fit to
Page options. Select Printer Features from the drop-down list under
Orientation to access the following features.
•
Reverse Duplex Printing: This option allows you to select general
print order compared to duplex print order. If this option does not
appear, your machine does not have this feature.
•
Fit to Page: This option allows you to scale your print job to any
selected paper size regardless of the document size. This can be
useful when you want to check fine details on a small document.
Toner Save Mode
Selecting this option extends the life of your toner cartridge and reduces
your cost per page without a significant reduction in print quality..
•
Printer Setting: If you select this option, this feature is determined
by the setting you have made on the control panel of the printer.
•
On: Select this option to allow the printer to use less toner on each
page.
•
Off: If you do not need to save toner when printing a document,
select this option.
Printing multiple pages on one sheet of paper
You can print more than one page on a single sheet of paper. This feature
provides a cost-effective way to print draft pages.
1. Open an application, and select Print from the File menu.
2. Select Layout from the drop-down list under Orientation. In the Pages
per Sheet drop-down list, select the number of pages you want to print
on one sheet of paper.
3. Select the other options you want to use.
4. Click Print, then the machine prints the selected number of pages you
want to print on one sheet of paper.
Printing on both sides of paper
You can print on both sides of the paper. Before printing in the duplex mode,
decide on which edge you will be binding your finished document. The
binding options are, as follows:
•
Long-Edge Binding: This option is the conventional layout used in
book binding.
•
Short-Edge Binding: This option is the type often used with calendars.
1. From your Macintosh application, select Print from the File menu.
2. Select Layout from the drop-down list under Orientation.
3. Select a binding orientation from Two Sided Printing option.
4. Select the other options you want to use.
Printing_ 66
Advertisement
Table of Contents
