Network Parameter Setting; Installing Network Connected Machine’s Driver; Restoring Factory Default Settings - Samsung SCX-3200 Series User Manual

For example, if your computer's IP address is 192.168.1.150,
enter 192.168.1.X (X is number between 1 and 254 other than
the computer's address).
• Subnet Mask: Enter a Subnet Mask.
• Default Gateway: Enter a Default Gateway.
6. Select Apply, then OK, and OK again. The printer will automatically
print the configuration report. Confirm that all the settings are correct.
Quit Safari. You may close and eject the installation CD-ROM. If
necessary, restart the computer's firewall. You have successfully
changed the IP address, subnet mask, and gateway.
IPv4 setting using SetIP Program (Linux)
SetIP program should be automatically installed during the printer driver
installation.
1. Print the machine's network configuration report to find your
machine's MAC address.
2. Open the /opt/Samsung/mfp/share/utils/.
3. Double-click the SetIPApplet.html file.
4. Click to open the TCP/IP configuration window.
5. Enter the network card's MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
6. The machine prints the network information. Confirm all the settings
are correct.
7. Close the SetIP program.

Network parameter setting

You can also set up the various network settings through the network
administration programs such as SyncThru™ Web Admin Service and
SyncThru™ Web Service.

Restoring factory default settings

You may need to reset the machine to the factory default settings when
machine that you are using is connected to new network environment.
Restoring factory default settings using SyncThru™
Web Service
1. Start a web browser such as Internet Explorer, Safari or Firefox and
enter your machine's new IP address in the browser window.
For example:
2. Click Go to access the SyncThru™ Web Service.
3. Click Login on the upper right of the website.
The Login window appears.
4. Type in the ID and Password, and then click Login.
If it is your first time logging into SyncThru™ Web Service, type in
the below default ID and password.
• ID: admin
• Password: sec00000
5. Click Settings > Network Settings.
6. Click Restore Default on the left pane of the website.
7. Click Clear.
8. Click Yes when the confirmation window appears.
9. Click OK when the success window appears.
10. Turn off and restart machine to apply settings.
INSTALLING NETWORK CONNECTED
MACHINE'S DRIVER
Windows
You can set up the machine driver, follow the steps below.
This is recommended for most users. All components necessary for
machine operations will be installed.
1. Make sure that the machine is connected to the network or USB and
powered on.
2. Insert the supplied software CD into your CD-ROM drive.
•
•
•
•
•
3. Select Install Now.
If necessary, select a language from the drop-down list.
4. Read License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
The program searches for the machine.
Network setup (SCX-3205W(K) only)_ 32
The software CD should automatically run and an installation window
appears.
If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter which represents
your CD-ROM drive. Click OK.
If you use Windows Vista, Windows 7 or Windows 2008 Server R2
click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing "X" with the letter which represents
your CD-ROM drive and click OK.
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in the
User Account Control windows.
If the AutoPlay window appears in Windows 7 or Windows 2008
Server R2, click Run Setup.exe in Install or run program field, and
click Yes in the User Account Control windows.
• For SCX-3205W(K), you can access Wireless Setting and
Installation menu. The Wireless Setting and Installation
allows you to install a wireless network to connect to the
machine with a USB cable (See "Setting a wireless network
with USB cable" on page 38).
• The Advanced Installation has two options, Custom
Installation and Install Software Only. The Custom
Installation allows you to select the machine's connection and
choose individual component to install. The Install Software
Only allows you to install the supplied software such as the
Smart Panel. Follow the instruction on the window.
If your machine is not found in the network or locally, the error