Stp Global Settings - Planet GS-4210-16T2S User Manual

16/24-port 10/100/1000t + 2/4-port 100/1000x sfp managed switch gs-4210 series
Table of Contents

Advertisement

The switch with the lowest Bridge ID (switch C) was elected the root bridge, and the ports were selected to give a high port cost
between switches B and C. The two (optional) Gigabit ports (default port cost = 20,000) on switch A are connected to one
(optional) Gigabit port on both switch B and C. The redundant link between switch B and C is deliberately chosen as a 100 Mbps
Fast Ethernet link (default port cost = 200,000). Gigabit ports could be used, but the port cost should be increased from the
default to ensure that the link between switch B and switch C is the blocked link.
This section has the following items:
STP Global Setting
STP Port Setting
CIST Instance Setting
CIST Port Setting
MST Instance Setting
MST Port Setting
STP Statistics

4.6.2 STP Global Settings

This page allows you to configure STP system settings. The settings are used by all STP Bridge instances in the Switch. The
Managed Switch support the following Spanning Tree protocols:
‧ Compatiable -- Spanning Tree Protocol (STP): Provides a single path between end stations, avoiding and
eliminating loops.
‧ Normal -- Rapid Spanning Tree Protocol (RSTP): Detects and uses of network topologies that provide faster
spanning tree convergence, without creating forwarding loops.
‧ Extension – Multiple Spanning Tree Protocol (MSTP): Defines an extension to RSTP to further develop the
usefulness of virtual LANs (VLANs). This "Per-VLAN" Multiple Spanning Tree Protocol configures a separate
Spanning Tree for each VLAN group and blocks all but one of the possible alternate paths within each Spanning
Tree.
The STP Global Settings screens in
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Configures STP system settings.
Configuration per port STP settings.
Configure system configuration.
Configure CIST port setting.
Configuration each MST instance settings.
Configuration per port MST setting.
Display the STP statistics.
Figure 4-6-4
and
Figure 4-6-5
Figure 4-6-4: Global Settings Page Screenshot
157
appear.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs-4210-24t2sGs-4210-16p2sGs-4210-24p2sGs-4210-48t4s

Table of Contents