4.7.4.3 MLD Group Table
This page provides MLD Group Table. The MLD Group Table screen in
The page includes the following fields:
Object
• VLAN ID
• Group IP Address
• Member Port
• Type
• Life(Sec)
4.7.4.4 MLD Router Setting
Depending on your network connections, MLD snooping may not always be able to locate the MLD querier. Therefore, if the
MLD querier is a known multicast router/ switch connected over the network to an interface (port or trunk) on your Managed
Switch, you can manually configure the interface (and a specified VLAN) to join all the current multicast groups supported by the
attached router. This can ensure that multicast traffic is passed to all the appropriate interfaces within the Managed Switch.
The MLD Router Setting screens in
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Figure 4-7-27: MLD Group Table Page Screenshot
Description
Display the current VID.
Display multicast IP address for a specific multicast service.
Display the current member port.
Member types displayed include Static or Dynamic, depending on selected
options.
Display the current life.
Figure 4-7-28
and
Figure 4-7-29
Figure 4-7-28: Add Router Port Page Screenshot
195
Figure 4-7-27
appears.
appear.