Planet GS-4210-16T2S User Manual page 316

• Type of Service
• ICMP
• ICMP Code
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Syn Specify the TCP "Synchronize sequence numbers" (SYN) value for this
ACE.
 Set: TCP frames where the Syn field is set must be able to match
this entry.
 Unset: TCP frames where the Syn field is set must not be able to
match this entry.
 Don't Care: Any value is allowed ("don't-care").
Fin Specify the TCP "No more data from sender" (FIN) value for this ACE.
 Set: TCP frames where the Fin field is set must be able to match
this entry.
 Unset: TCP frames where the Fin field is set must not be able to
match this entry.
 Don't Care: Any value is allowed ("don't-care").
Specify the type pf service for this ACE.
 Any: No specifc type of service is specified (destination port status is
"don't-care").
DSCP to match: If you want to filter a specific DSCP with this ACE, you can

enter a specific DSCP value. A field for entering a DSCP value appears. The
allowed range is 0 to 63. A frame that hits this ACE matches this DSCP
value.
 IP Recedence to match: If you want to filter a specific IP recedence with this
ACE, you can enter a specific IP recedence value. A field for entering an IP
recedence value appears. The allowed range is 0 to 7. A frame that hits this
ACE matches this IP recedence value.
Specify the ICMP for this ACE.
Any: No specifc ICMP is specified (destination port status is "don't-care").

Select from List: If you want to filter a specific list with this ACE, you can

select a specific list value.
 Protocol ID to match: If you want to filter a specific protocol ID filter with this
ACE, you can enter a specific protocol ID value. A field for entering a
protocol ID value appears. The allowed range is 0 to 255. A frame that hits
this ACE matches this protocol ID value.
Specify the ICMP code filter for this ACE.
 Any: No ICMP code filter is specified (ICMP code filter status is
"don't-care").
User Defined: If you want to filter a specific ICMP code filter with this

ACE, you can enter a specific ICMP code value. A field for entering an
ICMP code value appears. The allowed range is 0 to 255. A frame that
hits this ACE matches this ICMP code value.
316