Diagnostics; Cable Diagnostics - Planet GS-4210-16T2S User Manual

4.13 Diagnostics

This section provides the system CPU/momory usage status and IP layer network diagnostics tool for troubleshoot. The
diagnostic tool is designed for network manager to help them quickly diagnose problems between point to point and better
service customers.
Use the Diagnastics menu items to display and configure basic administrative details of the Managed Switch. Under System the
following topics are provided to configure and view the system information:
This section has the following items:


Cable Diagnostics


System Status

Ping Test

IPv6 Ping Test

Trace Router
4.13.1 Cable Diagnostics
The Cable Diagnostics performs tests on copper cables. These functions have the ability to identify the cable length and
operating conditions, and to isolate a variety of common faults that can occur on the Cat5 twisted-pair cabling. There might be
two statuses as follow:
If the link is established on the twisted-pair interface in 1000BASE-T mode, the Cable Diagnostics can run without

disruption of the link or of any data transfer.
If the link is established in 100BASE-TX or 10BASE-T, the Cable Diagnostics cause the link to drop while the

diagnostics are running.
After the diagnostics are finished, the link is reestablished. And the following functions are available.
Coupling between cable pairs.

Cable pair termination

Cable Length

Cable Diagnostics is only accurate for cables of length from 15 to 100 meters.
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
361