• Enable State
• Link Status
• Speed
• Duplex
• Flow Control Config
• Flow Control Status
4.4.4 LACP Setting
This page is used to configure the LACP system priority setting. The LACP Setting screens in
appear.
The page includes the following fields:
Object
•
LACP Enable
•
System Priority
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Display the current enable state.
Display the link status of per LAG group.
Display the current speed.
Display the current duplex mode.
Display the current flow control configuration.
Display the current flow control status.
Figure 4-4-8: LACP Setting Page Screenshot
Description
Disable or enable LACP function.
A value which is used to identify the active LACP. The Managed Switch with the
lowest value has the highest priority and is selected as the active LACP peer of
the trunk group. The available options are 1 to 65535.
116
Figure 4-4-8
and
Figure 4-4-9