Trace Router - Planet GS-4210-16T2S User Manual

4.13.5 Trace Router

Traceroute function is for testing the gateways through which the data packets travel from the source device to the destination
device, so to check the network accessibility and locate the network failure.
Execution procedure of the Traceroute function consists of: first a data packet with TTL at 1 is sent to the destination address, if
the first hop returns an ICMP error message to inform this packet can not be sent (due to TTL timeout), a data packet with TTL at
2 will be sent. Also the send hop may be a TTL timeout return, but the procedure will carries on till the data packet is sent to its
destination. These procedures is for recording every source address which returned ICMP TTL timeout message, so to describe
a path the IP data packets traveled to reach the destination. The Trace Route Setting screen in
The page includes the following fields:
Object
•
IP Address
• Max Hop
• Trace Route Results
Button
: Click to strat trace route process.
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Figure 4-13-6: Trace Route Setting Page Screenshot
Description
The destination IP Address
The maximum gateway number allowed by traceroute function
Display the current trace route result
366
Figure 4-13-6 appears.