Stp Bridge Settings - Planet FNSW-2400PS User Manual

The page includes the following fields:
Object

• STP Bridge Settings

• STP Port Settings
• Loopback Detection
Table 4-22 Descriptions of the Spanning Tree Web Page Screen Objects
4.7.1 STP Bridge Settings
This section introduces detail information of STP Bridge Settings of POE Web Smart Ethernet Switch; the screen in
4-39 appears and Table 4-23
The page includes the following fields:
Object
• STP Mode
Description
Allow to sets STP bridge of POE Web Smart Ethernet Switch.
.
in section 4.8.1
Allow to define STP on per port of POE Web Smart Ethernet Switch.
Explained in section 4.8.2
Allow to sets loopback detection on POE Web Smart Ethernet Switch.
Explained in section 4.8.3
descriptions the STP Bridge Settings Configuration of POE Web Smart Ethernet Switch.
Figure 4-39 STP Bridge Settings Web Page Screen
Description
The STP mode setting. Valid values are Disable, STP & RSTP. Default
mode is Disable.
User's Manual of FNSW-2400PS
.
.
Explained
Figure
- 47 -