TP-Link Archer C2600 User Manual page 74

To setup Daylight Saving time:
Select Enable Daylight Saving.
1.
Select the correct Start date and time when daylight saving time starts at your local time zone.
2.
Select the correct End date and time when daylight saving time ends at your local time zone.
3.
Click Save.
4.
Test the Network Connectivity
12.2
I want to test the connectivity between the router and the host or other network devices.
For example: I want to test the connectivity between my router and the Yahoo server.
How can I do that?
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
Go to Advanced > System Tools > Diagnostics page.
2.
3. Fill in the information with the help of page tips:
Choose Ping or Traceroute as the diagnostic tool to test the connectivity.
1)
Ping is used to test the connectivity between the router and the tested host, and measure the
round-trip time. Traceroute is used to display the route (path) your router has passed to reach the
tested host, and measure transit delays of packets across an Internet Protocol network.
2) Input the IP address or domain name of the tested host.
Click Start to begin the diagnostics.
4.
Completed!
Chapter 12 Administrate Your Network64