TP-Link Archer C2600 User Manual page 15

(Wireless)
(Wireless)
(LAN)
(WPS)
(USB)
Note:
1. After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and
then turn off.
mode. Please refer to
On
The wireless 2.4GHz band is working properly.
Off
The wireless 2.4 GHz band is disabled.
On
The wireless 5GHz band is working properly.
Off The wireless 5GHz band is disabled.
On
At least one LAN port is connected.
Off No LAN port is connected.
A wireless device has been successfully added to the network by WPS
On
function.
WPS handshaking is in process and will continue for about 2 minutes. Please
Flash
press the WPS button on other wireless devices that you want to add to the
network while the LED is flashing.
Off
A wireless device has failed to be added to the network by WPS function.
On
The USB device is identified and ready to use.
Flash
The USB device is being identified.
Off
No USB device is plugged into the USB port.
Chapter 1 Get to Know About Your
Note 2 for troubleshooting.
Router5