TP-Link Archer C2600 User Manual page 52

How can I 1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
do that?
2. Go to
3. Click
port and protocol will be automatically filled with contents. Keep the default setting of
Internal Port and Protocol. Fill in PC's IP address 192.168.0.100 in the IP Address field.
Note:
manually. Verify the port that the service type should use. The following steps based on the
environment mentioned at the beginning.
1)
2)
3)
4)
4. Click
The Internet users can enter http:// WAN IP: External Port (in this example: http:// 218.18.232.154:
Completed!
8000) to browse your personal website.
WAN IP must be a public IP address. As the WAN IP address is dynamic, you are suggested to
Tips
register a domain name for your router, then visit the website using http:// domain name:
External Port.
Advanced NAT Forwarding > Virtual Server
>
View Existing Services, and select HTTP in the prompt page. The external port, internal
If you don't find your service type in the Service Name field, Please fill in the parameters
External Port is provided by router for Internet users. They browse the website through
the WAN IP address and the external port. This field can be filled with a single port or a
ports range. Here we use 8000.
Internal Port is used by the server. The data received by External Port will be forwarded
to Internal Port. You can leave it blank if the Internal Port is the same as the External Port.
Here we use 80.
Enter the server PC's IP Address into the IP Address field. Here we use 192.168.0.100.
Protocol is the protocol used by the virtual service. Please select ALL if you aren't clear
which protocol to be used. Here we use TCP.
OK to save the settings.
Chapter 9
. Click Add.
NAT Forwarding42