TP-Link Archer C2600 User Manual page 17

1.3.3 The Side Panel
The router's side panel shows the connection ports, buttons (view from left to right). Refer to the following for detailed
instructions.
Item
USB
WiFi ON/OFF
WPS
RESET
For connecting to a USB storage device or a USB printer.
For turning on/off the WiFi function.
The switch for the WPS function. Pressing this button for less than 5 seconds enables the
WPS function. If your client devices, such as wireless adapters, that support Wi-Fi Protected
Setup, then you can press this button to quickly establish a connection between the
router and client devices and automatically configure wireless security for your wireless
network.
The switch for the RESET function. There are two ways to reset the router's factory defaults.
Method one: With the router powered on, use a pin to press and hold the RESET button
for at least 8-10 seconds. And the router will reboot to its factory default settings.
Method two: Restore the default setting from
Management.
Chapter 1 Get to Know About Your
Description
Backup & Restore
Router7
of the router's Web-based