To reserve an IP address for a specified client device:
1.
Click the
2.
Type in the MAC address of the client device.
3.
Type in the IP address to set to the client device.
4.
Enter the description for the rule.
5.
Select the Enable check box.
6.
Click OK.
The IP address reservation is configured successfully, and you can see the rule shown as below.
In addition:
Click
to add another address reservation rule.
Click
to change the status of the rule.
Click
to modify the setings of the rule.
Click
to delete the rule.
Select the check boxes of multiple rules before ID, and click
button.
Chapter 11
Specify the Network
to delete them at the same time.
Settings55