Note:
If your application isn't listed on the screen, click Custom Application to add application manually.
Name: Type in a name for your applicaiton.
Protocol: Select the protocol for your application, if your are not sure, select ALL.
Port: Enter the destination port for your application, usually each application has a fixed port, please ensure you enter the
correct the port. In this case, the destination port for ftp is 21.
2)
Set a middle priority rule for the phone:
a.
Select By Device and then click View Existing Devices.
Choose the respective device from the list.
b.
c.
Click OK.
Chapter 10 QoS48