Telkom Factory Default Configuration - NETGEAR DGN2200M User Manual

Telkom Factory Default Configuration

You can use the Restore Factory Settings button on the bottom panel of your router to restore
factory default settings. Press this button for 6 seconds. Your router will return to the factory
configuration settings shown in the following table.
Feature
Router Login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP
(LAN)
Subnet mask
DHCP server
Local network DHCP starting IP address
(LAN) continued
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
savings time
SNMP
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Technical Specifications
86
Default Behavior
http://www.routerlogin.com
admin
admin
Use default address
1492
Autosensing
10.0.0.2
255.255.255.0
Enabled
10.0.0.3
10.0.0.254
Enabled or disabled
GMT + 2:00
Automatic
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled