Block Services - NETGEAR DGN2200M User Manual

2. To enable keyword blocking, select one of the following:
• Per Schedule. Turn on keyword blocking according to the settings in the Schedule
screen.
• Always. Turn on keyword blocking all the time, independent of the Schedule screen.
• Never. Select never to turn off service blocking.
3. Enter a keyword or domain in the Keyword field, click Add Keyword and click Apply.
Some examples of keyword application follow:
• If the keyword XXX is specified, the URL http://www.badstuff.com/xxx.html is blocked.
• If the keyword .com is specified, only websites with other domain suffixes (such as
.edu or .gov) can be viewed.
• Enter a period (.) to block all Internet browsing access.
Up to 32 entries are supported in the Keyword list.
4. To delete a keyword or domain, select it from the list, click Delete Keyword, and then click
Apply.
5. To specify a trusted user, enter that computer's IP address in the Trusted IP Address field,
and click Apply.
You can specify one trusted user, which is a computer that will be exempt from blocking
and logging. Since the trusted user will be identified by an IP address, you should
configure that computer with a fixed IP address.
6. Click Apply to save your settings.

Block Services


To block services:
1. Select Security > Services.
2. Click Add and the following screen displays:
.
3. Either select a service from the Service Type drop-down list, or select User Defined to
create a custom service.
4. Click Add to create the service, and the Service is listed in the Service Table.
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Protect Your Network
35