Push 'N' Connect (Wps) Method; Wps Button - NETGEAR DGN2200M User Manual

N300 wireless adsl2+ modem router
Hide thumbs Also See for DGN2200M:
Table of Contents

Advertisement

Note:
Not all wireless adapters support passphrase key generation.
Key 1–Key 4. These values are not case-sensitive. You can manually enter the four
data encryption keys. These values must be identical on all computers and access
points in your network. Enter 10 hexadecimal digits for 64 bit encryption or 26 digits
for 128-bit encryption (any combination of 0
6.
Select which of the four keys will be the default.
Data transmissions are always encrypted using the default key. The other keys can be
used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA
authentication is selected.
7.
Click Apply to save your settings.

Push 'N' Connect (WPS) Method

For you to use Push 'N' Connect, your wireless computers or devices must support Wi-Fi
Protected Setup (WPS). Compatible equipment usually has the
can configure the network name (SSID) and set up WPA/WPA2 wireless security for the
wireless modem router and the wireless computer or device at the same time.
Some considerations regarding WPS are:
NETGEAR's Push 'N' Connect feature is based on the WPS standard. All other
Wi-Fi-certified and WPS-capable products should be compatible with NETGEAR products
that implement Push 'N' Connect.
If your wireless network will include a combination of WPS-capable devices and
non-WPS-capable devices, NETGEAR suggests that you set up your wireless network
and security settings manually first, and use WPS only for adding WPS-capable devices.
You can connect to the network using WPS either with a push button or a PIN.
Push Button. This is the preferred method. See the following section,
Entering a PIN. See

WPS Button

Any wireless computer or wireless adapter that will connect to the wireless modem router
wirelessly is a client. The client must support a WPS button, and must have a WPS
configuration utility, such as the NETGEAR Smart Wizard or Atheros Jumpstart.
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
WPS PIN Entry
on page 30.
Wireless Network Configuration
28
9, a
f, or A
F).
WPS symbol on it. WPS
WPS Button
.

Advertisement

Table of Contents
loading

Table of Contents