Configuring Vpn Lite Sites - NETGEAR DGN2200M User Manual

Configuring VPN Lite Sites

The VPN Lite Setup Wizard lets you configure your VPN Lite network connections
one-by-one.

To use the VPN Lite Wizard:
1. Log in to your router as described in
2. Select VPN Lite Wizard to display the following screen:
Figure 8. Select VPN Lite Wizard
3. Read the notice on the VPN Lite setup screen and click Next to continue.
4. Enter the information for one of the sites that you configured on the Telkom VPN Lite web
portal and click Next.
Figure 9. Enter user name and password
For the site that you are adding to your network:
Username. Enter the user name that you configured.
Password. Enter the password that you configured.
LAN IP/netmask. Enter the private and static IP address that you configured.
Note: The IP address for each site configured must be different and fall
within a different IP Subnet range.Example:
can be 10.0.1.0/24, then the IP subnet for
must be a different subnet, like 10.0.2.0/24. The IP Address must
correspond exactly to the one configured on the VPN Lite Webpage.
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Log In
siteA@evpn.lite.0000
******
10 0 1 10 24
VPN Lite
73
on page 7.
site1@evpn.lite.0001
site2@evpn.lite.0002