Attached Devices; Diagnostics And Rebooting - NETGEAR DGN2200M User Manual

Attached Devices

The Attached Devices screen contains a table of all IP devices that the wireless modem
router has discovered on the local network.
Select Maintenance > Attached Devices to view the following screen.
For each device, the table shows the IP address, device name if available, and the Ethernet
MAC address. Note that if the wireless modem router is rebooted, the table data is lost until
the wireless modem router rediscovers the devices. To force the wireless modem router to
look for attached devices, click the Refresh button.

Diagnostics and Rebooting

Select Maintenance > Diagnostics to display the following screen.
The wireless modem router has a diagnostics feature. You can use the Diagnostics screen to
perform the following functions from the wireless modem router:
• Ping an IP address to test connectivity to see if you can reach a remote host.
• Perform a DNS lookup to test if an Internet name resolves to an IP address to verify that
the DNS server configuration is working.
• Display the Routing table to identify what other wireless modem routers the wireless
modem router is communicating with.
• Reboot the wireless modem router to enable new network configurations to take effect or
to clear problems with the wireless modem router's network connection.
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Manage Your Network
50