NETGEAR DGN2200v3 Installation Manual
NETGEAR DGN2200v3 Installation Manual

NETGEAR DGN2200v3 Installation Manual

N300 wireless adsl2+ modem router
Hide thumbs Also See for DGN2200v3:

Advertisement

Quick Links

Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label
of your product and use it to register your product at
NETGEAR.com/register.
Registration is required before you can
use our telephone support service. Registration through our
website is strongly recommended.
Go to
support.netgear.com
for product updates and web support.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
October 2011
N300 Wireless ADSL2+ Modem Router
DGN2200v3 Installation Guide

Package Contents

The box should contain the following items. If any items are
incorrect, missing, or damaged, contact your NETGEAR dealer.
N300 Modem Router
Filter
Splitter
Filter/Splitter
Phone cable
Ethernet cable Power adapter
The filter or
splitter provided
depends on the
region.

Advertisement

Table of Contents
loading

Summary of Contents for NETGEAR DGN2200v3

  • Page 1: Package Contents

    Thank you for selecting NETGEAR products. The box should contain the following items. If any items are incorrect, missing, or damaged, contact your NETGEAR dealer. After installing your device, locate the serial number on the label N300 Wireless ADSL2+ Modem Router...
  • Page 2 Compliance You can use this diagram to connect your modem router or follow the instructions in this booklet. Declarations of Conformity For complete DoC please visit the NETGEAR EU Declarations of Conformity website at: support.netgear.com/app/answers/detail/a_id/11621/. For GNU General Public License (GPL) related information, please visit support.netgear.com/app/answers/detail/a_id/2649.
  • Page 3: Table Of Contents

    Contents Before You Begin ........2 Missing User Name and Password .
  • Page 4: Before You Begin

    Before You Begin Make sure that your DSL service is active before you install the modem router. You need the information listed here to install your DSL modem and connect to the Internet. Please locate it and have it on hand before you start the installation procedure. •...
  • Page 5: Missing User Name And Password

    I need my DSL service user name and password. Can you help me? Note: If your provider says they do not support NETGEAR devices, tell them you need only your DSL user name and password, you do not need support.
  • Page 6: Install Your Modem Router

    Install Your Modem Router A microfilter filters DSL interference out of standard phone equipment that shares the same line with DSL service. Example devices are telephones, fax machines, answering machines, and caller ID displays. 1. Connect the ADSL. a. Install an ADSL microfilter between the phone line and the phone.
  • Page 7 2. Add power to the modem router. a. Connect the power adapter to the router and plug the power adapter into an outlet. b. Wait for the WiFi LED on the front panel to turn on. If none of the LEDs on the front panel are on, press the Power On/ Off button on the rear panel of the modem router.
  • Page 8: Preset Wireless Security

    This information is located on the label on the bottom of the product. NETGEAR recommends that you do not change the preset WiFi network name (SSID) and network key (password). If you do change the settings, the security SSID and password on the bottom of the product no longer apply.
  • Page 9: Wireless Network Settings

    Wireless Network Settings Record the default preset wireless settings that are printed on the label in the space below for easy reference. WiFi Network Name (SSID): Network Key (Password): If you change the default settings, record them here for easy reference, and then store this booklet in a safe place: WiFi Network Name (SSID): Network Key (Password):...
  • Page 10: Add Wireless Devices To The Network

    This utility scans for all wireless networks in your area. Look for the preset NETGEAR WiFi network name (SSID) and select it. The SSID is located on the product label on the bottom of the router.
  • Page 11: Access The Modem Router To Make Changes

    Access the Modem Router to Make Changes After you use NETGEAR Genie to set up the modem router, you can log in to the router to view its settings or make changes.  To log in to the modem router: Launch a web browser from a computer or wireless devices that is connected to the modem router.
  • Page 12: Troubleshooting

    See the User Manual for more information about the modem router screens.  To change the password for the modem router user name: Log in to the modem router. Select Maintenance > Set Password to display the Set Password screen: Type your old password, and type the new password twice.
  • Page 13 If the modem router does not power on: Check your cables. • Disconnect and reconnect each cable. There is usually an audible click when the cable is correctly connected. • See if the telephone cable connecting your DSL modem router to the wall jack is plugged into a filter. A filter is not required if you do not have telephone voice service.
  • Page 14: Readyshare Access 1

    Note: If your USB device requires a power supply, you have to use it when connecting your USB device to a NETGEAR router or gateway. It may take up to 2 minutes before the USB drive is ready for sharing after it is connected to the router.
  • Page 15: Other Features

    Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their respective holders.

Table of Contents