Log In - NETGEAR DGN2200M User Manual

Log In

You can log in to the wireless modem router to view or change its settings, and to access the
Knowledge Base and documentation.
When you have logged in, if you do not click Logout, the wireless modem router waits for 5
minutes after no activity before it automatically logs you out.

To log in to the wireless modem router:
1. If you have not set up wireless connections yet, connect your computer to the wireless
modem router with an Ethernet cable.
2. In the address field of your Internet browser,
type http://www.routerlogin.com.
To connect, you can also enter the modem
router's IP address, http://10.0.0.2.
The wireless modem router user name and
password are not the same as any other user
name or password you might use to log in to
your Internet connection.
3. Enter admin for the user name and your
password (or the default, admin
For information about how to change the password, see
page 33.
4. The screen that displays when you log in depends on whether the wireless modem router
has already been set up.
• Smart Wizard screen: The wireless modem router has never been configured. You
can use the Setup Wizard to automatically detect your Internet connection (see
Wizard on page 8), or you can bypass the Setup Wizard and manually configure your
Internet connection (see
• Router Status screen: The wireless modem router Internet connection is not
configured, or the wireless modem router has been reset to its factory default
settings. See
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
).
Basic ISP Settings
Router Status and Usage Statistics
Internet Configuration
7
Change the Built-In Password
on page 13).
on page 45.
on
Setup