Lan Settings - NETGEAR DGN2200M User Manual

feature causes *.yourhost.dyndns.org to be aliased to the same IP address as
yourhost.dyndns.org.
9. Click Apply to save your configuration.
Note: If your ISP assigns a private WAN IP address such as 10.0.x.x or
10.x.x.x, the Dynamic DNS service will not work because private
addresses will not be routed on the Internet.

LAN Settings

The LAN Setup screen allows configuration of LAN IP services such as DHCP.
Note: If you change the LAN IP address of the wireless modem router
while connected through the browser, you will be disconnected. You
will have to open a new connection to the new IP address and log in
again.
The wireless modem router is shipped preconfigured to use private IP addresses on the LAN
side, and to act as a DHCP server. The wireless modem router's default LAN IP configuration
is as follows:
• LAN IP address. 10.0.0.2
• Subnet mask. 255.255.255.0
These addresses are part of the Internet Engineering Task Force (IETF)–designated private
address range for use in private networks, and should be suitable in most applications. If your
network has a requirement to use a different IP addressing scheme, you can make those
changes by opening the LAN IP Setup screen.
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Advanced Configuration
57