Display Interface Dialer - HP VSR1000 Layer 2 - Wan Access Command Reference

<Sysname> display dialer
Dialer0:
Dialer Route:
NextHop: 111.111.111.111
NextHop: 222.222.222.222
Dialer number: 123456789012345678901234567890
Dialer Timers(in seconds):
Auto-dial: 300,
Idle: 120,
Total Channels: 1
Free Channels: 1
Table 7 Command output
Field
Dialer Route:
NextHop: 111.111.111.111 Dialer
number:
123456789012345678901234567
890
Dialer number
Dialer Timers(in seconds):
Auto-dial: 300,
Enable: 5
Idle: 120,
Total Channels
Free Channels

display interface dialer

Use display interface dialer to display information about a dialer interface.
Syntax
display interface [ dialer ] [ brief [ down ] ]
display interface [ dialer [ interface-number ] ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
Dialer number: 123456789012345678901234567890
Dialer number: 123456789012345678901234567890
Compete: 20,
Wait-for-Carrier: 60
Description
Remote IP address and dial string configured by using the dialer
route command.
Dial string for a remote IP address.
DDR timers in seconds:
•
•
Compete: 20,
•
Wait-for-Carrier: 60
•
•
Total number of physical interfaces on the interface. For an ISDN
interface, it refers to the number of B channels.
Number of free channels.
Enable: 5
Auto-dial—Autodial timer set by the dialer timer autodial
command.
Compete—Compete-idle timer set by the dialer timer compete
command.
Enable—Link holddown timer set by the dialer timer enable
command.
Idle—Link idle-timeout timer set by the dialer timer idle command.
Wait-for-Carrier—Wait-carrier timer set by the dialer timer
wait-carrier command.
37