Description; Dialer Bundle Enable - HP VSR1000 Layer 2 - Wan Access Command Reference

Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies or system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for interface Dialer 1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] default

description

Use description to configure a description for a dialer interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of an interface is interface-name Interface, for example, Dialer1 Interface.
Views
Dialer interface view
Predefined user roles
network-admin
Parameters
text: Specifies the interface description, a case-sensitive string of 1 to 80 characters.
Examples
# Set the description of interface Dialer 1 to dialer-intf.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] description dialer-intf

dialer bundle enable

Use dialer bundle enable to enable bundle DDR on a dialer interface.
Use undo dialer bundle enable to disable bundle DDR on a dialer interface.
30