Dialer Timer Autodial - HP VSR1000 Layer 2 - Wan Access Command Reference

Syntax
dialer bundle enable
undo dialer bundle enable
Default
No DDR is enabled on a dialer interface.
Views
Dialer interface view
Predefined user roles
network-admin
Usage guidelines
Before using bundle DDR, use this command to enable bundle DDR on a dialer interface.
The undo dialer bundle enable command clears all DDR configurations on a dialer interface.
Examples
# Enable bundle DDR on interface Dialer 1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] dialer bundle enable

dialer timer autodial

Use dialer timer autodial to set the auto-dial timer of DDR.
Use undo dialer timer autodial to restore the default.
Syntax
dialer timer autodial autodial-interval
undo dialer timer autodial
Default
The auto-dial timer of DDR is 300 seconds.
Views
Dialer interface view
Predefined user roles
network-admin
Parameters
autodial-interval: Specifies the interval between call attempts, in the range of 1 to 604800 seconds.
Examples
# Set the auto-dial interval of DDR to 60 seconds on interface Dialer 0.
<Sysname> system-view
[Sysname] interface dialer 0
[Sysname-Dialer0] dialer timer autodial 60
31