User - HP VSR1000 Layer 2 - Wan Access Command Reference

Use undo timer-hold to restore the default.
Syntax
timer-hold seconds
undo timer-hold
Default
The polling interval is 10 seconds.
Views
Virtual PPP interface view
Predefined user roles
network-admin
Parameters
seconds: Specifies the interval at which the LAC or the LNS sends keepalive packets, in the range of 0 to
32767 seconds.
Usage guidelines
A virtual PPP interface periodically sends keepalive packets to the peer. If the peer fails to receive
keepalive packets within 10 keepalive intervals, it considers the link faulty and reports a link layer down
event. As a result, the link is closed.
Do not set too small an interval for low-speed links. On a low-speed link, it might take a long time for
large packets to be delivered, which can delay sending and receiving of keepalive packets.
Examples
# Set the polling interval to 20 seconds for interface Virtual-PPP 10.
<Sysname> system-view
[Sysname] interface virtual-ppp 10
[Sysname-Virtual-PPP10] timer-hold 20

user

Use user to configure the condition for the LAC to initiate tunneling requests.
Use undo user to delete the configured condition.
Syntax
user { domain domain-name | fullusername user-name }
undo user
Default
No condition is configured.
Views
L2TP group view
Predefined user roles
network-admin
26