Mtu; Reset Counters Interface - HP VSR1000 Layer 2 - Wan Access Command Reference

<Sysname> system-view
[Sysname] interface dialer 1

mtu

Use mtu to set the MTU of a dialer interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU of dialer interfaces is 1500 bytes.
Views
Dialer interface view
Predefined user roles
network-admin
Parameters
size: Specifies the maximum transmission unit (MTU) in the range of 128 to 1500 bytes.
Usage guidelines
The MTU setting of a dialer interface affects the fragmentation and reassembly of IP packets.
Examples
# Set the MTU of interface Dialer 1 to 1200 bytes.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] mtu 1200

reset counters interface

Use reset counters interface to clear the statistics of a dialer interface.
Syntax
reset counters interface [ dialer [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
dialer: Specifies a dialer interface.
interface-number: Existing dialer interface number.
41