Outgoing Call; Pre-Dial; Post-Dial With Headset Button; Dial Using A Pre-Programmed Number - Mitel 5614 User Manual

OUTGOING CALL

PRE-DIAL

Enter the number and press
key "Clear" can be pressed to erase the number if required. The navigation key can be used
to step, add or delete digits from the middle of a number.
An international number can be dialled from the handset by entering a + character followed by
the country code and local number. To enter the + character, long press the 0 key until the
character is shown in the display.

POST-DIAL WITH HEADSET BUTTON

The headset button can be used to obtain a dial tone and dial a number. However, the headset
must have been configured via the WinPDM/Device Manager to allow this.

DIAL USING A PRE-PROGRAMMED NUMBER

Note: The support for Multifunction button is dependent on what model of handset that
is used. For more information, see
A Navigation key, Hot key, Soft key or Multifunction button can be programmed with a handset
number, as described in section
programmed with a handset number as long as it has been configured by the administrator via
the WinPDM/Device Manager.
To dial a pre-programmed number, press the pre-programmed key or button. The call is
connected automatically.

DIAL A NUMBER FROM THE CALL LIST

1. Press .
2. Select a number press
call is started. Press "More" and select "Edit number".

DIAL LAST CALLED NUMBER WITH HEADSET BUTTON

If a headset is used, the headset button can be used to dial the last called number. However,
the headset must have been configured via the WinPDM/Device Manager to allow this.

DIAL THE SENDER OF A MESSAGE

You can call the sender of a message stored in the message list, from the Messaging menu.
1. Open the menu by pressing the confirmation button, or the soft key "Menu".
2. Select "Messaging".
3. Select "Inbox".
4. Select message from the list.
to get the line. The number is displayed while dialling. The Soft
Functions and Accessories
on page 24. A headset button can also be
Shortcuts
or soft key "Call" to dial. The number can be edited before the
on page 3.
35