Mitel 5614 Quick Reference Card

Mitel 5614 Quick Reference Card
1
2
17
3
4
16
5
6
7
15
8
ABC DEF
9
14
GHI JKL MNO
PQRS TUV WXYZ
10
13
11
12
Display Icons
Signal Strength
Voice Mail
Microphone Off/Muted
Loudspeaker On
Loudspeaker Off
Sound Off
Headset Connected
New Message
New Message, Important
Bluetooth Headset
Mitel (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the trademarks of their respective holders.
© 2017, Mitel Networks Corporation. All rights reserved.
1 Multifunction/Alarm Button
2 Earpiece Speaker
3 Volume Up
4 Volume Down
5 Mute and PTT Button
6 Softkeys
7 Off-Hook Key
8 Five-way Navigation Key
9 Voice Mail Access
10 Key Lock and Upper/Lower Case
11 Microphone
12 Space
13 Sound Off key
14 Tactile Indicators
15 End and On/Off key
16 Color Display
17 Headset Connector
Read Message
New Colored Message
Missed Call
Incoming Call
Outgoing Call
System Connection
Key Lock
Phone Lock
Bluetooth
Profile Active
Turning the Handset On/Off
1. Press and hold the On-hook key until
"Switch on/off is displayed.
2. Press "Yes/No."
Making a Call
Dial the number and press . The name of
the called party is displayed if available.
OR
Press to open the call list and use the
Navigation key to scroll the list of your last
twenty calls. Press to dial.
OR
1. Press the Menu softkey.
2. Select Contacts, and select Call contact.
3. Select contact from list.
4. Press or Call to dial the number.
Answering a Call
• Press to answer a call in normal mode.
OR
• Press the Handsfree key to answer in
speaker mode.
Ending a Call
• Press to end a call.
Placing a call on Hold
1. Press the More softkey.
2. Select Hold/Retrieve to put the call on hold.
To retrieve the Held call:
1. Press the More softkey.
2. Select Hold/Retrieve to retrieve the call on
hold.
QUICK REFERENCE GUIDE
Transferring a Call
1. Press the More softkey.
2. Select Transfer to New Call.
3. Dial the number to which you want to transfer
the call and press Call.
4. Select Release to connect the two parties.
OR
Wait for an answer, announce the transfer
and then select Release.
Conference
1. Press the More softkey.
2. Select New Call to put the current call on
hold.
3. Dial the number of the third party.
4. Wait for an answer.
5. Press More and then select Conference
Call to conference all the parties together.
Rejecting a Call
• When the ring signal sounds, press Call
information will be stored in the Call list.
Adjusting Volume Levels
To adjust earpiece volume during a call:
• Press upper and lower volume
buttons to increase/decrease volume.
To change ringer volume:
• In the menu, select Settings.
• Select Sound & Alerts.
• Select Volume.
• Use the navigation key arrows to adjust
selected volume and press Back to save.
To turn Loudspeaker on/off:
• Press the Handsfree key before or
during a call.