Headsets; Operation; Enable Bluetooth; Pair And Connect A Bluetooth Headset - Mitel 5614 User Manual

HEADSETS

A number of Bluetooth headsets for different work situations have been tested together with
the handset. Refer to the datasheet for a list of verified Bluetooth headsets.
Since the Bluetooth supports the Bluetooth standard, other headsets may also work although
not verified.
Note: The Bluetooth headset may have more or less functions than described here, refer to the
Manual for the Bluetooth headset.

OPERATION

Step between the menus with the navigation key
pressing the Soft key "Select".

ENABLE BLUETOOTH

To enable the Bluetooth function enter
"Enable".

PAIR AND CONNECT A BLUETOOTH HEADSET

Before a headset can be used a connection (pairing) between the headset and the handset
must be established.
1. Place the Bluetooth headset and the handset next to each other.
2. Enable Bluetooth, see Enable Bluetooth.
3. Put the Bluetooth headset in pairing mode, refer to the user manual for the Bluetooth
headset.
4. On the handset enter
"Put headset in Pairing mode" is displayed.
5. Press "OK". It now searches for a Bluetooth headset to connect to.
6. When headset is found, press "Pair".
7. If needed, enter PIN code, see user manual for the Bluetooth headset. Press "OK".
The dialog Successful pairing appears if the pairing process was successful. The Bluetooth
headset is also connected and this is indicated by a colored square

ADD ANOTHER BLUETOOTH HEADSET

Up to eight headsets can be paired to the handset, but only one at a time can be selected. To
pair another headset repeat section "Pair and Connect a headset" steps 1-6.
The paired headsets are displayed by a default name in the handset menu "Headset". See
Change the name of Bluetooth headset
in the handset menu, select Bluetooth and select
in the menu, select "Bluetooth" > "Headset", "Add new". A dialog
. Confirm each menu selection by
in front of the headset.
131