Environmental Requirements; Troubleshooting - Mitel 5614 User Manual

Mitel 5614 DECT Phone User Manual for MiVB
OPERATION NOTICE
ACCESSIBILITY AND VOICE QUALITY
Bluetooth uses the frequency of 2.45 GHz. WLAN, microwave oven, and other devices that
use the same frequency can disturb the use of a Bluetooth headset.
OPERATION AREA
Maximum distance between the headset and the handset is 10 metres. The communication
distance between the handset and headset may vary considerably due to the environment and
disturbances from other 2.45 GHz equipment. Different headsets can also give different
communication distances.
OUT OF RANGE
If a connection cannot be made with the selected Bluetooth headset the call is transferred
automatically to the handset.
If the Bluetooth headset and the handset get out of range from each other the connection is
temporarily lost. Since the last connected headset is always considered "selected", the
connection is automatically established again when a call is made or received.

ENVIRONMENTAL REQUIREMENTS

BLUETOOTH HEADSET BATTERY
Refer to the manual for the Bluetooth headset.

TROUBLESHOOTING

PROBLEM
No headset found
Pairing fails
Connecting fails/Failed to
connect headset
134
REASON
Headset is turned off
Headset is out of battery
Headset is out of range
Headset is not in pairing
mode
Headset is not in pairing
mode
Incorrect PIN entered
Headset is not turned on
Headset is out of range
Link key in headset has
been deleted
Headset is already
connected to another
handset
SOLUTION
a
Turn on headset
1
Charge headset
Move headset closer to handset
< 10 metre.
Turn headset into pairing mode
Turn headset into pairing/discoverable
1
mode
Try again and enter correct PIN
1
Turn on headset
Move headset closer to handset
1
Repeat pairing procedure
Disconnect headset from the other
handset
1
1