Profiles - Mitel 5614 User Manual

Mitel 5614 DECT Phone User Manual for MiVB
Delete/Delete All
1 Select "More".
2 Select "Delete" or "Delete all".
3 Select "Yes" if the unsent message shall be deleted.

PROFILES

An own profile can be set up for incoming calls, message alerts, message volume, vibrating alerts,
key sound etc. This can be useful when there are many users on the same handset who require
different sound profiles. It can also be used for temporarily settings, for example while in a
meeting incoming calls should be silent. A user can then switch to his or her own particular
profile when using the handset.
If no profile is selected, the normal settings are used.
NOTE: The settings in a profile can be superseded if the corresponding settings in a system
profile are activated. When the system profile is activated, its settings are not displayed in the
handset menu. However, they can be displayed when a system profile is activated in the handset.
See Chapter 12 System Profiles
1 Enter the menu by pressing the "Menu" Soft key, or the confirmation button on the
Navigation key.
2 Select
Add New Profile
1 Enter the menu by pressing the "Menu" Soft key, or the confirmation button on the
Navigation key.
2 Select
3 Select "Add new".
4 Enter name of the profile.
5 Press "Save".
6 Press "More" and then select "Add setting".
7 Select the setting you want to add to the profile.
Repeat steps 6-7 if you want to add additional settings.
8 Mark the wanted setting and press "Edit" to make the changes.
A new profile based on another profile can also be created in the following way:
1 Enter the menu by pressing the "Menu" Soft key, or the confirmation button on the
Navigation key.
2 Select
3 Select "Add new".
4 Enter name of the profile.
5 Press "Save"
6 Press "More" and then select "Import from".
7 Select the profile which settings to be used for the new profile.
90
on page 103.
in the menu.
in the menu.
in the menu.